Evaluation of Resin/Composite Materials
Evaluation of the Physical Properties of
Carbon Fiber Reinforced Plastic (CFRP)
JEF-TEC can evaluate the physical properties of CFRP and proposes the appropriate application plan the clients are looking for.
Evaluation of Mechanical Strength of the Raw Material
Testing of Fiber Reinforced Plastics (FRP)
JEF-TEC can provide a variety of tests on fiber reinforced plastics (FRP) and metals according to the JIS standards.
The coefficient of elasticity and the Poisson's ratio of the FRP in addition to tensile, compression and flexural strengths can be determined.
Compression Tests of Carbon Fiber Reinforced Plastics (CFRP)
JEF-TEC can provide the compression tests of carbon fiber reinforced plastics (CFRP) in a wide range of temperature.
Compression Test of the Resin Molded Parts
JEF-TEC can provide the compression tests of molded parts under high load in a wide range of temperature.
Determination of Hardness of Plastic Materials at High Temperature
JEF-TEC can provide the test on determination of the hardness of plastic materials in a wide range of temperature and analyzes their structural features..
Tests on Fracture Toughness of Plastic Materials
JEF-TEC can provide the tests on ductile fracture of plastic materials under high load.
Evaluation of the High-Speed Deformation
Evaluation of the High-Speed Deformation on Plastic Materials
JEF-TEC can provide the tests on the high speed deformation in a wide range of plastic materials after selecting the optimum test condition.
High-Speed Tensile Test on the Actual Parts
JEF-TEC uses a servo-hydraulic type high speed tensile testing machine for evaluation of the high speed deformation of the parts.
Evaluation of Creep Deformation Behavior
Creep Tests of Fiber Reinforced Plastics (FRP)
JEF-TEC offers the high accuracy creep deformation tests under high load and at high temperature.
Evaluation of Creep Properties of the Plastic Materials in Tensile-Shear Loading
JEF-TEC offers a test for evaluating creep properties of the plastic materials in tensile-shear loading under a wide range of load.
Evaluation of Creep Properties in Compression of the Metal Foil and Film/Sheet in the Thickness Direction
JEF-TEC offers a test for evaluating creep properties of the metal foil and film (thickness: in a range of a few dozens μm).
Evaluation of the Fatigue Resistance Properties
Fatigue Tests of the Plastics and Composite Materials under the Atmosphere at the Constant Temperature and the Constant Relative Humidity
JEF-TEC offers the fatigue resistance tests under the atmosphere at the temperature of (18-30) ℃±0.1℃ and the relative humidity of (45-75)% ±1.0%.
Fatigue Tests of the Plastic Material In Flexural Bending
JEF-TEC offers the fatigue resistance test of the plastic materials in flexural bending according to JIS K 7082 and JIS K 7119.
Fracture Analysis of Fiber Reinforced Composite Materials
JEF-TEC offers the fracture analysis of a wide variety of fiber reinforced composite materials used in the wide fields.
Evaluation of Weatherability
Weather Meter Test
JEF-TEC can provide the accelerated weathering test on the materials under irradiation with simulated sunlight, mainly with ultraviolet light.
Cyclic Corrosion Testing (CCT)
JEF-TEC can select the test conditions such as spraying with saltwater, drying, and wetting in the cyclic corrosion testing (CCT).
Structural Analysis of Carbon Fiber Reinforced Plastics
JFE-TEC can provide the structural analysis of carbon fiber reinforced plastics used in the wide fields.
Analysis of the Functional Groups on the Surface of Carbon Fibers used in Carbon Fiber Reinforced Plastics
JFE-TEC can provide the analysis of the functional groups on the surface of carbon fibers used in CFRP.